NRC-Industries
HomeSite map
EquipmentAbout usCommunityDistributorsServicesContact
Sliding rotator 40/50 SR - Compact Incident Manager
Distributors
Dealer Locator
Go

Newsletter

Join in and get the latest NRC news about upcoming events, promotions and emerging technologies delivered right to your inbox.





Sliding rotator 40/50 SR - Compact Incident Manager

A real power house, the 40/50 SR offers all the well-known power of NRC sliding rotators along with an exceptional maneuverability that is greatly appreciated by operators. Particularly practical in the city, the 40/50 SR is compact, strong and can adapt to any situation. It can go anywhere to allow you to carry out your work successfully.

Advantages:

  • The sliding system combined with a rotator system truly allows you to do virtually anything with the load in the safest way
  • Simply slide and rotate to bring the load from one side to the rear or the other side
  • Get maximum strength when the load is in the corner where it is so important in most circumstances
  • Sliding system
  • Double your lifting capacity by working with the boom in its retracted position
  • Low-profile outriggers give you better maneuverability by being able to bring the load over them thus reducing the overhang
  • Self-leveling system and anti-twist system
  • Work safely with the auxiliary winches (option)

Download our brochure


 
  • 50 Ton hydraulic wrecker
  • 40 Ton Safe lifting capacity (25% security factor)
  • 93" sliding boom ; Locks on sliding system
  • Dual 35,000lbs hydraulic planetary gear winches
  • 3/4" x 200` steel cable on each drum
  • Air clutch release on winches
  • Cable tensioners
  • Tandem hydraulic pump
  • Dual 6-1/2" bore x 50" cylinder for power boom elevation
  • Lock & safety valve on elevation and extension cylinders
  • "V" shaped boom
  • Directionnal boom sheave
  • Nylon slide on boom
  • Dual independant front & rear outriggers with 48" extension each
  • Lubrication fittings on all moving parts
  • Dual control
  • Lights in levers control ;  2 pressure gauges
  • Heavy duty body 100" wide ; Hi-tensile steel used for structural parts
  • Two tool boxes; Door check & hold back
  • 168" C.A. (from cab to center of rearmost axle)
  • Sandblast & Epoxy primer paint & Undercoating underneath the body
  • Monocoque body
  • Rear mounted recovery anchors ; recovery anchors on rear outriggers
  • Recovery anchors on each outrigger for side-pulling
  • Federal standard #108 light group ; Mud flaps
  • Electric plug & Air plug