NRC-Industries
HomeSite map
EquipmentAbout usCommunityDistributorsServicesContact
Distributors
Dealer Locator
Go

Newsletter

Join in and get the latest NRC news about upcoming events, promotions and emerging technologies delivered right to your inbox.





Sliding rotator 50/65 SR

Everybody’s dream machine, a tough and versatile unit for recovery work and extra-heavy towing. Especially designed for the most difficult operations, the Incident Manager, with its sliding rotator system, moves your load away more quickly than any other competitor's equipment.

Advantages:

  • The sliding system combined with a rotator system truly allows you to do virtually anything with the load in the safest way
  • Simply slide and rotate to bring the load from one side to the rear or the other side
  • Get maximum strength when the load is in the corner where it is so important in most circumstances
  • Double your lifting capacity by working with the boom in its retracted position
  • Low-profile outriggers give you better maneuverability by being able to bring the load over them thus reducing the overhang
  • Self-leveling system and anti-twist system
  • Computer controlled hydraulic system
  • Work safely with the auxiliary winches (option)
  • Full proportional remote control
  • Sliding system
  • Best Boom range of elevation in the industry

Download our brochure


 
  • 65 Ton hydraulic wrecker
  • 50 Ton Safe lifting capacity (25% security factor)
  • 128" sliding boom ; Locks on sliding system
  • Dual 45,000lbs planetary two speed winches
  • 3/4" x 200` steel cable on each drum
  • Air clutch release on winches + cable tensionners
  • Anti-twist device ; Self levelling
  • "L" shaped mounting plates
  • Computer controlled hydraulic system ; wireless proportionnal remote control
  • Visual alarm to prevent roll-over
  • Tandem hydraulic pump
  • Dual 6-1/2" bore x 57" cylinder for power boom elevation
  • Lock & safety valve on elevation and extension cylinders
  • "V" shaped boom
  • Directionnal boom sheave ; Nylon slide on boom
  • Dual independant front & rear outriggers with 54" extension each
  • Lock & safety valve on each cylinder of hydraulic jack legs
  • Lubrication fittings on all moving parts
  • Lights in levers control  & tool boxes ;  4 pressure gauges
  • Heavy duty body 100" wide ; Hi-tensile steel used for structural parts
  • Two tool boxes; 48" Tunnel tool box ; door checks
  • 241" C.A. (from cab to center of rearmost axle)
  • Sandblast & Epoxy primer paint & Undercoating underneath the body
  • Monocoque body ; Dual control
  • Rear mounted recovery anchors ; recovery anchors on rear outriggers
  • Recovery anchors on each outrigger for side-pulling
  • Federal standard #108 light group ; Mud flaps
  • Electric plug & Air plug