
![]()
Join in and get the latest NRC news about upcoming events, promotions and emerging technologies delivered right to your inbox.
Sliding rotator 40/50 SR - Compact Incident Manager
A real power house, the 40/50 SR offers all the well-known power of NRC sliding rotators along with an exceptional maneuverability that is greatly appreciated by operators. Particularly practical in the city, the 40/50 SR is compact, strong and can adapt to any situation. It can go anywhere to allow you to carry out your work successfully.
Advantages:
- The sliding system combined with a rotator system truly allows you to do virtually anything with the load in the safest way
- Simply slide and rotate to bring the load from one side to the rear or the other side
- Get maximum strength when the load is in the corner where it is so important in most circumstances
- Sliding system
- Double your lifting capacity by working with the boom in its retracted position
- Low-profile outriggers give you better maneuverability by being able to bring the load over them thus reducing the overhang
- Self-leveling system and anti-twist system
- Work safely with the auxiliary winches (option)
-
Standard Equipment Specifications Optional Equipment Technical Graphs -
Standard Equipment Specifications Optional Equipment Technical Graphs -
Standard Equipment Specifications Optional Equipment Technical Graphs -
Standard Equipment Specifications Optional Equipment Technical Graphs
- 50 Ton hydraulic wrecker
- 40 Ton Safe lifting capacity (25% security factor)
- 93" sliding boom ; Locks on sliding system
- Dual 35,000lbs hydraulic planetary gear winches
- 3/4" x 200` steel cable on each drum
- Air clutch release on winches
- Cable tensioners
- Tandem hydraulic pump
- Dual 6-1/2" bore x 50" cylinder for power boom elevation
- Lock & safety valve on elevation and extension cylinders
- "V" shaped boom
- Directionnal boom sheave
- Nylon slide on boom
- Dual independant front & rear outriggers with 48" extension each
- Lubrication fittings on all moving parts
- Dual control
- Lights in levers control ; 2 pressure gauges
- Heavy duty body 100" wide ; Hi-tensile steel used for structural parts
- Two tool boxes; Door check & hold back
- 168" C.A. (from cab to center of rearmost axle)
- Sandblast & Epoxy primer paint & Undercoating underneath the body
- Monocoque body
- Rear mounted recovery anchors ; recovery anchors on rear outriggers
- Recovery anchors on each outrigger for side-pulling
- Federal standard #108 light group ; Mud flaps
- Electric plug & Air plug




