NRC-Industries
Home Site map Français
EquipmentAbout usCommunityDistributorsServicesContact
Get Adobe Flash player
equipment

Sliding rotator 50/65 SR

Everybody’s dream machine, a tough and versatile unit for recovery work and extra-heavy towing. Especially designed for the most difficult operations, the Incident Manager, with its sliding rotator system, moves your load away more quickly than any other competitor's equipment.

Advantages:

  • The sliding system combined with a rotator system truly allows you to do virtually anything with the load in the safest way
  • Simply slide and rotate to bring the load from one side to the rear or the other side
  • Get maximum strength when the load is in the corner where it is so important in most circumstances
  • Double your lifting capacity by working with the boom in its retracted position
  • Low-profile outriggers give you better maneuverability by being able to bring the load over them thus reducing the overhang
  • Self-leveling system and anti-twist system
  • Computer controlled hydraulic system
  • Work safely with the auxiliary winches (option)
  • Full proportional remote control
  • Sliding system
  • Best Boom range of elevation in the industry

Download our brochure


 
  • 65 Ton hydraulic wrecker
  • 50 Ton Safe lifting capacity (25% security factor)
  • 128" sliding boom ; Locks on sliding system
  • Dual 45,000lbs planetary two speed winches
  • 3/4" x 200` steel cable on each drum
  • Air clutch release on winches + cable tensionners
  • Anti-twist device ; Self levelling
  • "L" shaped mounting plates
  • Computer controlled hydraulic system ; wireless proportionnal remote control
  • Visual alarm to prevent roll-over
  • Tandem hydraulic pump
  • Dual 6-1/2" bore x 57" cylinder for power boom elevation
  • Lock & safety valve on elevation and extension cylinders
  • "V" shaped boom
  • Directionnal boom sheave ; Nylon slide on boom
  • Dual independant front & rear outriggers with 54" extension each
  • Lock & safety valve on each cylinder of hydraulic jack legs
  • Lubrication fittings on all moving parts
  • Lights in levers control  & tool boxes ;  4 pressure gauges
  • Lights in standard tool boxes and tunnel tool box
  • Heavy duty body 100" wide ; Hi-tensile steel used for structural parts
  • Two tool boxes; 48" Tunnel tool box ; door checks
  • 241" C.A. (from cab to center of rearmost axle)
  • Sandblast & Epoxy primer paint & Undercoating underneath the body
  • Monocoque body ; Dual control
  • Rear mounted recovery anchors ; recovery anchors on rear outriggers
  • Recovery anchors on each outrigger for side-pulling
  • Federal standard #108 light group ; Mud flaps
  • Electric plug & Air plug